• <track id="r3cdc"></track>

    <output id="r3cdc"></output>

    <td id="r3cdc"></td>

  • <pre id="r3cdc"><del id="r3cdc"><menu id="r3cdc"></menu></del></pre>
  • <pre id="r3cdc"></pre>
  • <p id="r3cdc"></p>
      Hello! Welcome to Mesoco Metal Technology(Kunshan) Co.,Ltd Official website!

      Chinese/ English/ Japanese/ Back to Homepage/ Sitemap

      Mesoco - one stop stamping parts production service provider

      To provide customers with precision stamping products

      National Service Hotline

      0512-57995161

      Position:Homepage --> News
      • 1. The rebound of the material causes the product to be unqualifiedMeasures to reduce rebound:The stamping material with stable mechanical properties with large elastic modulus and small yield point is selected.Add correction process and use correction bending instead of free bending;Before bending, the material should be annealed, so tha…

      • Precision metal stamping is a process technology that uses a die to press metal or sheet metal on the stamping equipment to deform or separate, and then obtain a specific shape and size. Fine metal stamping is a metal stamping process that is currently widely used. It has many advantages in terms of technology and economy. The following e…

      • In the metal stamping production, the daily maintenance of the mold is crucial, which affects the performance and service life of the mold. The maintenance of metal stamping processing molds requires attention to the following:1. The mold must be sharpened after prolonged use. After grinding, the edge surface must be demagnetized, and it …

      • First, the curling phenomenon appearing on the punching hole has different shapes due to different reasons.(1) Curling due to uneven die surface.When the edge of the die edge is collapsed or notched, the above defects are often generated when stamping in a concave state after partial correction. Eliminate it by improving the accuracy of t…

      • In recent years, medical device stampings have shown a dynamic growth trend, and medical device manufacturers are also continuously looking for better turning centers and tools to enhance their competitive advantage. This has also become an important channel for the growth of the tool industry. Yichi Metal saw this huge development pr…

      • Yichi Metal 2019 Leisurely Thousand Island Lake Annual Tour

      • There are two types of discharge plates in the stamping die. One is the rigid discharge plate, which has large discharge force and reliable discharge, and is mainly used for strips with a thickness of more than 0.5mm. One is the elastic pressure discharge plate, which uses rubber, spring and other elastic elements to provide the discharge…

      • The reasons for the occurrence of unilateral burrs in metal stamping parts are mainly in the following aspects:1). Die assembly error. If the punch and the fixing plate are not perpendicular or loose due to wear, or the positioning pin is loose, it cannot be guaranteed that the male and female molds have the correct fixing position.2) Poo…

      Technical Support: Guocheng 2018-2025 Mesoco Metal Technology(Kunshan) Co.,Ltd All Rights Reserved.
      天天干-夜夜啪_天天操-天天啪-天天射-天天日-天天撸-天天在线视频,免费在线电影 <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <文本链> <文本链> <文本链> <文本链> <文本链> <文本链>